Furnace Service and Repair in Denver
When a furnace is not operating properly it will have to be diagnosed by one of our service technicians to determine the problem, in some cases the problem is minor, others require replacement parts and sometimes the furnace may need to be replaced.
We recommend that you start with our Free trip & diagnostic (with repairs or pay only $60 without repairs available between 8am – 4pm M-F).
This gets a technician to your house to determine the problem. Light commercial service available, call for rates.
After hours service 4pm – 8pm or weekends/holidays is available with a minimum $175.00 service charge plus parts and repairs.
Once the service tech determines the problem you will receive a flat rate quote for the repairs.
If you don’t want the repairs made you pay only the applicable trip & diagnostic fee.
Senior Citizen customers 65 and over can request a 10% discount on repair parts.
Below are some flat rate prices for typical repairs to residential boilers.
These prices are for residential standard parts and repairs. OEM, commercial and special order parts may cost more and sometimes require shipping charges. The service technician will provide you with a firm quote.
(no parts required)
When a diagnostic reveals a simple problem and no parts are required, for example loose wires, plugged filters etc.
Prices are based on business hours at $99 and after hours at $175.
This is a safety that monitors over-heating, specific temperature settings are required.
Pressure Switch Replacement
This is a safety that monitors restrictions in the exhaust, settings must match manufacturer specifications.
Prices are based on single stage at $275 and two stage at $325.
This device ignites the burner. Ignitors generally last 3 to 5 years, bad ignitors require a direct replacement.
Prices are based on standard models at $250 and silicone & carbide models at $325.
Inducer Motor Replacement
This device exhausts the fumes to the outdoors. If it fails nothing else should operate.
Prices are based on single stage at $625 and two stage at $725.
Control Board Replacement
This is the control center and requires a direct replacement with specific settings, often rewiring is required.
Prices are based on single stage at $625, two stage non variable at $675, and two stage variable at $825.
Gas Valve Replacement
This controls the flow of gas to the main burner, it requires matching specifications and opening the gas line.
Prices are based on single stage at $625, two stage at $675, and standing pilot at $650.
Blower Motor Replacement
This motor circulates air through the vents, it requires matching specifications such as horsepower, electrical ratings and mounting design.
Prices are based on most 120V motors at $725, ECM motors at $975, and Variable speed motors at $1250.
We carry programmable and non-programmable thermostats, programmable thermostats are a great way to save energy as you can program them according to your schedule. None programmables are nice & simple.
Prices are based on Pro 3000 non-programmable at $175 and Pro 4000 programmable at $225 (Includes installation).
This is a device that produces the low voltage for most controls, it will typically burn out due to electrical shorts.
Wiring repairs will be additional when required.
There are other failures that may require repairs not listed here, our technician will quote a fair flat rate price following our company guidelines. You have the option to accept the repair quote or to pay only the diagnostic fee.
Need to speak with a technician?
Manufactures recommend that you have your HVAC equipment installed by a quality professional and serviced annually to insure safe and proper operation.